T. 1300 222 445 | www.melec.com.au
For further information about our Warranties please go to:
melec.com.au/legal/warranties
INSTALLATION - MOUNTING
1.
Choose your preferred installation method: Horizontal (Fig.1) Vertical (Fig.2).
2.
Loosen the two screws which are pre-installed on the mounting bracket to fix fitting.
3.
Install the product on the pole tighten screws and ensure fitting is secure (Fig.4).
4.
Adjust the angle of the fitting (maximum adjustment is 15 degrees upward or downward (Fig.5).
5.
Open the back cover using the support rack to support the back cover in the open position (Fig.6) Wire the fitting in accordance with
Australian Standards and in accordance with the wiring schematic provided.
6.
Secure the back cover ensuring all gaskets and seals are in place (Fig.7).
FIG 1
FIG 2
FIG 3
FIG 4
FIG 5
FIG 6
FIG 7
WIRING DIAGRAM
Grey -
