WLI-PCM User’s Manual
108
Possible cause
The ESS-ID of the target access point is not entered correctly.
Solution
The ESS-ID is upper/lower case sensitive. Check the ESS-ID of the access point
again, referring to the user’s manual of the WLA-T1 (available separately).
Possible cause
Communication with the access point is not possible due to poor signal reception.
Solution
Shorten the distance between the WLI-PCM and access point, or remove any
obstacles between them, and re-try communication.
Possible cause
The access point has not completed starting.
Solution
It takes 1 ~ 2 minutes for the access point to start after power is supplied. Wait
for 2 minutes or longer before attempting connection after turning the access
point on.
Solution
Refer to "Change target access point" on page 112.
The access point cannot be accessed using
Client Manager (access point is displayed in
gray even when it is found). (continued)
Change target access point
