27
of the device no more than 4 meters away. The remote control has an opening angle of
about 60 °.
Sunlight or a strongly lit room, or even the presence of obstacles between the remote
control and the IR sensor of the device, can interfere with the correct operation of the
remote control. Placing the device on a reflecting surface (glass, shiny metal) can create
problems with IR reception.
Wiring
●
Connect the antenna cable to the RF IN input.
●
You can connect the device to the TV, in standard PAL resolution, using the SCART
cable (cable not supplied).
●
You can connect the device to the TV in HD resolution (720p) or FULL HD (1080i / p)
via the HDMI cable (cable not supplied).
●
[Optional] You can also send the audio signal to an external amplifier, using an audio
coaxial cable (COAX - CABLE NOT SUPPLIED). This output is present only on certain
models.
●
Connect AC/DC to main, then on the plug-in on the back panel
Please refer to the diagram below.
