5 Sealing
13
2.
Press the sealing lever down until it latches.
3.
Leave the sealing lever depressed until the control lamp flashes green in short intervals (approx. 4 s).
4.
When the control lamp is continuously illuminated green again, return the sealing lever upwards to its
starting position.
5.
Perform a visual inspection of the film after every successful sealing procedure.
PLEASE NOTE
With bags with side gussets, perform weekly controls of the seal seam using an ink test
(e.g. MELAink test).
Sealing procedure for film rolls
Produce film bag
To package instruments in transparent sterilization packaging bags from the roll, proceed as follows:
1.
Guide the end of the film roll along the device rear
panel into the lower paper guide with the paper side
facing downwards (
lower slit
). Slide the film forwards
and between the pressure and sealing rail to the
desired length.
2.
Press the sealing lever down until it latches.
3.
Leave the sealing lever depressed until the control
lamp flashes green in short intervals (approx. 4 s).
