4 Commissioning
11
Connecting the sealing device
ü
The sealing device has been switched off.
ü
Use the power cable included in the scope of delivery.
1.
Connect the rubber connector of the power cable to
the rear side of the sealing device and connect the
power plug in the mains socket.
2.
Insert the sealing lever in the square hole on the right
or left hand side of the device as required.
Switching on the sealing device
}
Switch on the sealing device at the power switch. The
control lamp on the fore side of the sealing device will
illuminate yellow after activation.
Operational Readiness
As soon as the control lamp is continuously illuminated green, the pre-set sealing temperature has been
reached and the sealing device is ready to operate.
