8
13
PROTECTIVE MEASURES
ADDITIONNAL
SAFE
TY
MEASURES
CAUTION
Depending on the application field of the machine (private or commer-
cial), observe the applicable occupational safety and health, safety and
accident prevention and environmental regulations.
WARNING
Some dust created while machining certain types of material can
contain chemicals known to cause cancer, birth defects or other re-
productive harm. Always inform yourself on the material you have
at hand before machining it. Some examples of these chemicals are:
lead from nonferrous metals with lead content, carbonate from car-
bon fiber, arsenic and chromium from chemically-treated lumber.
Your risk from exposures to these varies, depending on how often you per-
form this type of work. To reduce your exposure to these chemicals: work
in a well ventilated area, and work with approved safety equipment, such
as those dust masks that are specially designed to filter out microscopic
particles.
The Evo CNC Machine has been designed for advanced users and is only to be operated by technically skilled
persons above the age of 18.
The machine is only to be used in a technically perfect condition, which is to be ensured by the user prior to
each operation.
The emergency switch as well as, if applicable, additional safety devices, always need to be easily accessible and
fully functional.
The use of lubrication systems is allowed. Please take into consideration that if you are using a MDF spoilerboard
(machine worktable), the MDF panel will swell and be damaged by the water.
ASSEMBLY & SYSTEM SETUP
The machine is solely suitable for the operation in dry, interior spaces.
Keep the environmental temperature of the machine dust-free. High dust exposure can cause damages to the
system.
The humidity should be within normal limits for humidity indoors (40 to 60 %). Protect the machine against
wetness and humidity.
The ideal environmental temperature for the system lies between 18°C to 25°C, respectively from 64°F to 77°F.
Particularly protect the electronics against overheating by avoiding direct sun radiation or indirect heating up
nearby a radiator.
Place the machine on a suitable table or on a machine stand. In order to provide a comfortable working height,
we recommend a working height of approx. 840 mm. For a torsion-free stand, the surface of the machine stand
needs to be solid and even.
The machine is to be secured in a way that it cannot shift or fall down.
All movable parts of the machine must be able to operate collision-free.
The routing of the tool´s cables, such as with the milling motor, has to be effected in a way that the cable cannot
be clamped between the guide ways of the machine. For this purpose, use the cable chains we have set up for
the different axis.
The machine has to be easily accessible and operable. Especially the emergency switch has to be easily acces-
sible at all times.
Take care to ensure a sufficient illumination of the machine`s location and the workplace surrounding the ma-
chine.
The control unit has to be ideally placed under the work area of the machine and the interface unit has to be
placed in the vicinity of the machine.
Please follow carefully our attached mounting guide and datasheet in order to properly mount your Mekanika
CNC machine.
If you have any questions, please do not hesitate to contact us!
ENVIRONMENTAL CONDITIONS
MACHINE POSITIONING
MACHINE ASSEMBLY