RECOMMENDED WORKPLACE LAYOUT
ELEC
TRIC
AL
SAFE
TY
NOTICE
Do not expose the machine to moisture. The machine is only suitable for
indoor use.
WARNING
Machine plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with grounded machines. Unmodified plugs
and matching outlets will reduce the risk of electric defects and malfunc-
tions
W
ORK
AREA
SAFE
TY
NOTICE
Keep work area clean and well lit. Cluttered or dark areas are prone to ac-
cidents.
NOTICE
Operate the machine only in interior spaces on a solid, horizontal table or
workbench.
CAUTION
Keep children and bystanders at a distance while operating a power tool.
Distractions can cause you to lose control and can result in accidents.
CAUTION
Do not operate the machine in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Machines can create sparks
which may ignite the dust or fumes.
USE
OF
THE
M
A
CHINE
NOTICE
Do not leave a running tool unattended, turn power off. Only when tool
comes to a complete stop and is disconnected from the mains it is safe.
NOTICE
Use the machine and accessories in accordance with these instructions,
taking into account the working conditions and the work to be performed.
Use of the machine for operations different from those intended could re-
sult in a hazardous situation with high probability of superficial injury.
NOTICE
Never use dull or damaged end mills. Sharp end mills must be handled
with care. Damaged end mills can snap during use. Dull end mills require
more force to cut the tool, possibly causing the end mill to break.
NOTICE
The speed and feed of the end mill when carving, routing or cutting is very
important. Always observe the speed and feed for the particular end mill
recommended.
NOTICE
Do not allow familiarity gained from frequent use of your rotary tool to be-
come commonplace. Always remember that a careless fraction of a second
is sufficient to inflict severe injury.
6
15
OPERATING
AREA
LOADING AREA
0.5 met
er
M
AINTENANCE & SECURIT
Y
AREA
MAINTENANCE & SECURITY
AREA
1 met
er
M
AINTENANCE & SECURIT
Y
AREA