GENERAL INFORMATION
CONTACT FOR CUSTOMER INFORMATION
NOTICE
MEANING OF TERMS USED
All instructions, warranties and other collateral documents are subject to change at the sole discretion of
Mekanika SRL.
Please visit www.mekanika.io on your product page to access up-to-date informations and documents.
The following terms are used throughout this operating manual to indicate various levels of potential harm
when operating this machine. The safety symbols, and their explanations, deserve your careful attention and
understanding.
The safety warnings themselves do not eliminate any danger. The instructions or warnings they give are not
substitutes for proper accident prevention measures.
NOTICE
Procedures which, if not properly followed, create a possibility of physical property damage and a little or no
possibility of injury.
CAUTION
Procedures which, if not properly followed, create a probability of physical property damage and a possibility
of serious injury.
WARNING
Procedures which, if not properly followed, create a probability of property damage, collateral damage, serious
injury or death or create a high probability of superficial injury.
Read the entire operating manual in order to become familiar with the features of the machine and how to
operate them. Failure to operate the machine correctly can result in damage to the machine, personal property
and cause serious injury, electric shock and/or fire.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.
Mekanika SRL
Rue de Birmingham, 102
1070 Anderlecht
Belgium
E-mail: [email protected]
If you encounter any issue or have any question regarding your machine, contact us and we’ll get back to you
within 24 hours.
TECHNICAL DATA
Model
Dimensions
Working Area
Weight
Evo-S
850x1250 mm
650x650 mm
37 kg
Evo-M
850x1250 mm
650x1050 mm
42 kg
Evo-L
1250x1250 mm
1050x1050 mm
48 kg
DIMENSIONS & WEIGHT
TECHNICAL SPECIFICATIONS
Working area
650 x 650mm | 650 x 1050mm | 1050 x 1050mm
Z clearance height
90mm with a travel distance of 75mm
Linear Guides
Custom v-slot aluminium profiles
Drive system
Pulleys & PU GT2 timing belts with steel core
Accuracy
0.05mm
Maximal travel speed
20,000mm/min
Motors (X, Y1, Y2, Z)
4 High-torque Nema23 stepper motors
Structure
High quality aluminium profiles and digitally manufactured steel plates
Controller & Software
PlanetCNC software installed and pre-configured on a Raspberry Pi 4B
4
17