MEITRACK T1 User Guide
Copyright © 2018 Meitrack Group All rights reserved. - 8 -
USB port
Handset/RFID reader
port
Power/Input/Output
port
6
First Use
6.1
Installing the SIM Card
1.
Loosen the screws, and remove the front cover of the device.
2.
Insert the SIM card into the card slot with its gold-plated contacts facing towards the Printed Circuit Board
(PCB).
3.
Close the cover, and tighten the screws.
Note:
Power off the device before installing the SIM card.
Ensure that the SIM card has sufficient balance.
Ensure that the phone card PIN lock has been closed properly.
Ensure that the SIM card in the device has subscribed the caller ID service if you want to use your authorized
phone number to call the device.
6.2
Charging the Device
When you use the device for the first time, connect the device's GND (-Black) and Power (+Red) wires to 12
–
24 V
external power supply for charging. Ensure that the device is charged at least three hours. Eight hours are
recommended.
The device can be installed on a vehicle only after it is configured and tested.
6.3
LED Indicator
Press and hold down the power button for 3–5 seconds to start the device.
GPS Indicator (Blue)
Steady on
A button or an input is triggered.
