MEITRACK T1 User Guide
Copyright © 2018 Meitrack Group All rights reserved. - 18 -
1
Red
Power output
Output voltage: 5 V
2
Black
Ground wire
3
Green
RX, T1 receives data from the camera.
4
White
TX, T1 sends data to the camera.
To connect T1 to a camera, a 4-pin to 8-pin cable is required.
Connect the device to
the 8-pin interface.
Connect the camera to
the 4-pin interface.
Note: The RS232 port can be used with either the S microphone or the RFID reader at a time.
8.6
Mounting the T1
Tighten the four screws shown in the following figure.
If you have any questions, do not hesitate to email us at [email protected].
