Meinberg microSync HR100/DC Скачать руководство пользователя | Manualshive

Страница: 31 / 52

background image

7 Installation of GNSS Antennas

7 Installation of GNSS Antennas

Two different antennas are available for our combined GPS/GLONASS/Galileo/BeiDou satellite receivers that
are each designed to fulfill different tasks or applications.

The active Multi-GNSS L1 antenna is the standard accessory and can receive signals from the GPS, GLONASS,
Galileo, and BeiDou satellite systems. This antenna is ideal for fixed-location systems, operates using a 5 V
DC supply voltage supplied by the receiver, and features an integrated surge protector.

For mobile applications, such as cars, RVs, vans, ships, trains, and aircraft, we recommend the use of the
RV-76G, an active GNSS antenna that is suitable for direct installation in an enclosure (chassis, panels, etc.)

7.1 Installation of the Multi-GNSS Antenna

WARNING!

WARNING!

Do not mount the antenna without an effective fall arrester!

- Ensure that you work safely when installing antennas!

Danger of death from falling!

- Never work without an effective fall arrester!

- Do not carry out any work on the antenna system if it is not possible to maintain

Do not work on the antenna system during thunderstorms!

the prescribed safe distance to exposed lines and electrical substations.

Danger of death from electric shock!

- Do not carry out any work on the antenna system or the antenna cable

if there is a risk of lightning strike.

Selecting the Antenna Location

To avoid difficulties with synchronization, select a location that allows for an unobstructed view of the sky
so as to ensure that enough satellites can be found. The line of sight between the antenna and satellites should
not be obstructed in any way. The antenna must also not be installed under power lines or other electrical
lighting or power circuits.

Installation Conditions for Optimum Operation:

•

clear view of 8

◦

above the horizon or

•

clear view towards equator (if clear view of 8

◦

not possible) or

•

clear view between 55th north and 55th south parallels (satellite orbits).

Problems may arise if all of these views are obstructed, as four satellites must be located to calculate

a new position.

microSync

Date: January 7, 2022

27

«
...
29
30
31
32
33
...
»

Содержание microSync HR100/DC





















































Отзывы:

Нет отзывов

Похожие инструкции для microSync HR100/DC

Бренд: Xtreamer Страницы: 2

Бренд: Patton electronics Страницы: 16

Бренд: Danfoss Страницы: 36

Бренд: Perlight Solar Страницы: 19

IMP-C1000-SFP-bt-24 Series

Бренд: ANTAIRA Страницы: 2

LaCinema Mini HD Connect

Бренд: LaCie Страницы: 74

UNITISERVE-SSD -

Бренд: NAIM Страницы: 27

Бренд: Elation Страницы: 8

Бренд: Sunforce Страницы: 1

Бренд: Digitus Страницы: 4

Бренд: Goobay Страницы: 4

Бренд: Hoymiles Страницы: 2

Бренд: Microchip Technology Страницы: 24

SUNNY BOY 3000-US

Бренд: SMA Страницы: 36

Бренд: Tektronix Страницы: 11

Бренд: Omicron Страницы: 19

Бренд: M-system Страницы: 3

SUNNY BOY STORAGE 3.7

Бренд: SMA Страницы: 142

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды