Meinberg LANTIME M300/RDT, Техническое описание

Страница: 19 / 25

5 LANTIME M300/RDT - Front connectors
OK
ESC
Terminal
USB
RDT: serial Refclock
NTP: Offset PPS: -4us
UTC 12: 00 : 00
Mon , dd.mm.yyyy
F1
F2
1 2 3 4 5
Time Service
Ref. Time
Network
Alarm
LANTIME M300 LANTIME M300
1.
The root menu is shown when the receiver has com-
pleted initialization after power-up. With the four
arrow buttons and the buttons "OK", "ESC", "F1" and
"F2" the navigation and setting of parameters can be
managed.
Main menu can be reached by pressing
"ESC" several times. The main menu reflects some of
the main parameters of the time server. First line dis-
plays the status of the Reference Clock. The text "RDT:
serial Refclock" might be replaced by "RDT: ext. NTP
server". If the external time source signal is discon-
nected or not working properly, the text "not available"
is displayed instead.
RDT: serial Refclock
NTP: Offset PPS: -4µs
UTC 12: 00 : 00
Mon , dd.mm.yyyy
2.
About the keypad with the 4 arrows and "OK" but-
tons, "ESC", "F1" and "F2" to navigate to the display
through the menus. The main menu can always be
achieved by repeatedly pressing the "ESC" key.
OK
ESC
F1
F2
16 Date: 3rd September 2019 LANTIME M300/RDT