Meilhaus Electronic ME-90 Series, Электронное руководство, Страница: 17 / 120

START-Menu
➜
System Control
➜
Performance
and Maintenance
➜
System
➜
Hardware
➜
Device
Manager
 Check the entry of your board in the device manager. The
entry must not be marked with the symbol „exclamation
mark on a yellow circle“. This would indicate an
installation error.
 By double clicking, open the window „Settings for…“.
o
When clicking the property page Resources, the
following resource settings are shown: interrupt,
memory range and I/O range. Under „Device
conflicts“ the message „No conflicts“ must be
found.
If one of the above noted entries does not exist, check the following
items:
? Your new board was assigned to the device class „? Other
Components“. This could happen when installing Windows when a
new board is plugged in the computer or if the installation was
cancelled (depending on the system)
o
If this occurs, delete the entry, reboot your
computer and run the driver installation once
more.
? Is there an address or interrupt conflict?
o
Edit the BIOS settings of your computer if
necessary (possibly reserving an IRQ channel for
ISA boards) or change the interrupt assignment
under Windows. Refer to the manuals of the
relevant devices.
o
The property page General should show „Device is
ready to run“ under „Device Status“ and the
property page Resources must show „No
conflicts“ under „Device conflicts“.
o
Reboot your computer if you have changed any
settings.