Meilhaus Electronic ME-90 Series Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 120

Meilhaus Electronic ME-90 Series Скачать руководство пользователя страница 15

should be all that is required to seat the board fully and properly
into the slot.



Close the computer case.



Connect the power cable to your computer.



Power up your computer and continue with the chapter
“Driver Installation”.

2.2 Driver Installation

2.2.1 Unpacking the Driver Software

Proceed with the following steps if you have got the driver update
as a self-extracting archive (e.g. by download or the Windows 9x
driver coming with the CD/DVD, if supported by the regarding
model). Else you can start directly with the driver installation (see
the following chapters).



Navigate to the appropriate archive file (e.g.

<Drive>:\InstallWindows\Serial\me-9x00\win9x\
me9x00vxd.exe)

and unpack the driver software by

double-clicking the archive file.



Enable the option „Overwrite Files Without Prompting“
(default)



Only Windows NT 4.0: enable the option „When Done
Unzipping Run: setup.exe“



Choose a directory and click on „Unzip“. By default the
directory

C:\Meilhaus\ME-9x00\install

will be used.

o

The driver software will be unpacked.



Click on “Close”.

Continue with the following chapters.

2.2.2 Installation under Windows* 95/98/Me/2000/XP

! If you have got the driver as a self-extracting archive (e.g. by

download or the Windows 9x driver coming with the CD/ DVD)
you must unpack the driver software first. See chap.2.2.1
"Unpacking the Driver Software".

«
...
13
14
15
16
17
...
»

Содержание ME-90 Series

























































































































Отзывы:

Нет отзывов