Meilhaus Electronic ME-5000 series, Руководство пользователя

Страница: 22 / 38

Rev. 1.1E Manual ME-5001
Programming Page 22 Meilhaus Electronic
Subdevice-Konfigurationen ME-5001
*Standard configuration at shipment. The most recently selected
configuration in the ME-iDC is stored in a non-volatile memory on the
board, and is automatically loaded after a restart.
Depending on requirements, you can select from the following
operation modes :
• Single: Individual values can be read or written in this operation
mode.
• Interrupt: For the interrupt handling in the bit-pattern change mode
(see chapter 4.2.1 starting on page 27).
Subdevice type… …subtype I/Os
ID of the
configuration
Subdevice 0 (DIO, FI)
Digital input/output (DIO) Single 8 bit
bi-directional
0*
Frequency input (FI) Single 8 channels 1
Subdevice 1 (DIO, FO)
Digital input/output (DIO) Single 8 bit
bi-directional
0*
Frequency output (FO) Single 8 channels 1
Subdevice 2 (DIO)
Digital input/output (DIO) Single 8 bit
bi-directional
0*
Subdevice 3 (DIO)
Digital input/output (DIO) Single 8 bit
bi-directional
0*
Subdevice 4 (DIO)
Digital input/output (DIO) Single 8 bit
bi-directional
0*
Subdevice 5 (DIO)
Digital input/output (DIO) Single 8 bit
bi-directional
0*
Table 2: Subdevice configuration ME-5001