Operating instructions Glass-, Dish- and Utensilwashing machine
M-iClean
9712938
We reserve the right to change execution and construction!
Page
42
of
48
18.1 Basic safety measures during normal operation
DANGER
Risk of injury due to electric shock! Damage to property!
Switch off the power supply using the locally available mains disconnector prior to
any maintenance or repair work and secure it with a padlock!
The key for this lock must be kept in the hands of the person carrying out the
maintenance and repair work!
Failure to observe these precautions can result in severe injury or damage to proper-
ty.
WARNING
Risk of injury or severe injury!
Caused by unauthorised access.
Set up a safety fence during maintenance procedures to prevent unauthorised ac-
cess.
Existing safety systems must not be removed!
As a matter of principle, no safety systems may be disassembled or decommissioned
(except in the event of maintenance and repair work)!
Danger of scalding/burning!
Before carrying out any maintenance and repair work, ensure that all the parts of the
machine that may be touched have cooled down to room temperature!
18.1.1 Before setting in operation - after maintenance and repair
works
Legal obligations relating to the avoidance of waste materials and to their recy-
cling/removal in accordance with applicable regulations must be observed!
In particular, during installation, repair and maintenance work, materials that could
pollute water must not pollute the ground or run into the sewerage system:
Grease and oils
Hydraulic oils
Coolant
Cleaning fluids containing solvents
These materials must be stored, shipped, collected and disposed of in suitable
containers!
18.2 Dosing equipment
The lifetime of dosing equipment and its components depends on the chemicals
used.
The peristaltic tube is a wear and tear part and its lifetime depends largely on the
chemicals used and the periods of use. Replace as required.
