Operating instructions Glass-, Dish- and Utensilwashing machine
M-iClean
9712938
We reserve the right to change execution and construction!
Page
19
of
48
6.7
Requirements for the waste water connection
A waste water pump is integrated in the waste water line (further infor-
mation about this is in the technical sheet).
The drain hose must be connected to the waste water pipe in the building.
A grease trap may be needed, depending on the machine application.
The requirements of the waste water supply in the accompanying GiO
module operating and service manual must be observed for machines
equipped with a GiO module.
6.8
Emergency-off
Switch the machine off completely via the on-site circuit breaker.
6.9
Chemicals for the operating the machine
Only alkali detergents and acid rinse agents suitable for use in commercial dish-
washers may be used. Relevant information is provided by the manufacturers of
these products.
MEIKO recommends brand cleaning products from leading manufacturers.
cleaning and hygiene products are an excellent choice.
Using unsuitable products can considerably reduce the service life of the dosing
units and other machine components. Observe the manufacturers' dosing instruc-
tions.
Detergents and rinse aids can present a health hazard if they are not correctly
used. Please observe the manufacturers’ instructions on the original packing and
on the safety data sheets.
"Items for rinsing are tribologically influenced in particular by chemicals and in-
creased temperatures during the process, as well as mechanical stresses caused
by handling and transporting."
If a descaling agent is used, please strictly observe the manufacturer’s handling
and safety instructions. After such an agent has been used, the product must be
completely removed from the machine, as even small residues are capable of
destroying plastic parts and sealing materials.
Chemical product settings
The correct settings for the quantity of detergent and rinse agent depend on the
product used. The relevant chemical supplier can install the correct setting.
