4. Plug in DVI to DVI&VGA breakout cable
(DDVY01)
to DVI-YPbPr-VGA-x and plug in VGA to
component adapter
(VYPBA01)
to the VGA connector of the breakout cable.
5. Connect a device equipped with DVI output (such as PC) to the DVI connector of the breakout
cable.
6. Connect a device equipped with component video output (YPbPr such as DVD player or camera)
to the 3-RCA jack of the
VYPBA01.
7. Connect a device equipped with VGA output (such as laptop) to the VGA connector of
MX-1004
.
8. Connect a device equipped with composite video output to composite input of the
MX-1004
.
9. Connect your computer with the
MX-1004
by a 9-pin RS-232 cable and then install the software.
10. Plug in AD power cord into AC power socket.
11. Execute the control software and establish the connection between PC/Laptop and
MX-1004
.
12. For detailed software control operation, please refer to the software instruction section.
Must be connected in
between all the time
Component video
YPbPr
DVI
Composite video
CVBS
Connect to
RS-232
DVI
Figure 3: Connection Diagram
DVI or VGA Display
Software control
VGA
Page
10 of 18
