Meggitt Fuelling Products
Maintenance Manual (MMF145)
Pressure Fuelling Nozzle
–
F145 Series
USE OR DISCLOSURE OF DATA ON THIS PAGE IS SUBJECT TO THE RESTRICTIONS ON THE TITLE PAGE OF THIS DOCUMENT
05 Jan 2015
Revision 6.3
B
GIVE CLEANERS SPECIAL CARE
x
When cleaners are being used read and follow the material safety data sheet (MSDS) instructions for
correct handling.
Equipment Safety Information
The following safety information briefly discusses hazards peculiar to the equipment, which are likely to be
encountered during maintenance activity.
GENERAL OPERATING LOCATION PRECAUTIONS
x
Use only authorized replacement parts or hardware.
x
Obey Lock-Out/Tag-Out procedures when working on the nozzle and make sure that personnel
protection equipment such as electrical grounds are installed.
x
Avoid hazardous voltage situations that can result from unsafe conditions such as, but not limited, to
the following:
o
Incorrect grounding
o
Handling electrical leads or devices with wet hands or on wet ground.
o
Damaged electrical wire insulation.
o
Incorrect connection of the power terminals.
o
Short circuits to ground.
OPERATION AND MAINTENANCE OF FUEL SYSTEMS
BEFORE TURNING THE OPERATING LEVER; MAKE SURE ALL 3 LUGS
OF AIRCRAFT FUELING ADAPTER ARE PROPERLY ENGAGED IN THE
F145J NOZZLE. REFER TO SAFETY BULLETIN 7872 FOR MORE DETAILS.
x
Protect all fuel lines from damage or puncture. Do not operate the nozzle if a fuel leak is detected.
x
Do not use flammable solvents for cleaning parts.
x
Check for tools, rags, or loose parts left in the area before resuming operation.
x
Do not attempt to remove the nozzle from the system without first isolating it from the line pressure and
venting all of the trapped internal pressure.
