Meggitt Fuelling Products
Maintenance Manual (MMF145)
Pressure Fuelling Nozzle
–
F145 Series
USE OR DISCLOSURE OF DATA ON THIS PAGE IS SUBJECT TO THE RESTRICTIONS ON THE TITLE PAGE OF THIS DOCUMENT
05 Jan 2015
Revision 6.4
15
MAINTENANCE
1.
Maintenance Instructions
The nozzle seals are checked for integrity every 3 months as part of the standard PCV checks or every
6 months when carrying out the Hose Pressure test in accordance with the JIG Guidelines. Any
defective seals found at that time are replaced immediately.
NOTICE:
Nozzle
with TEO26383, or “Rev
R
” and subsequent revision letter;
received a design improvement
where additional ball races were added to the nozzle body and swivel adapter.
Nozzle
without TEO26383, or “Rev
R
” and subsequent revision letter
and prior; can be upgraded by
changing the following components and adding additional parts (refer to
Table 7
):
Table 7. Parts Information
OLD PART
NUMBER
IPL Figure 1
Item
NOMENCLATURE
INSTRUCTIONS/
DISPOSITION
NEW PART
NUMBER
IPL Figure 1
Item
QTY
430031
1
Body, Nozzle Assy
Change to
430031-1
1A
1
430048
78
Adapter, Swivel Assy
Change to
430048-1
78
1
-
Ball Race, Adapter
Add
430049
75A
1
-
Ball Race, Nozzle Body
Add
430059-1
98
1
