Megger IDAX 300, Руководство пользователя

Страница: 8 / 46

8
IDAX 300/322/350 ZP-AG03E AG033586EE
2 SAFETY
2
S
afety
2.1 General
Important
Read and comply with the following in-
structions.
Always comply with local safety regula-
tions.
Symbols
Caution, refer to accompanying
documents.
Protective conductor terminal.
WEEE, Waste Electronic Equipment.
Please utilize your local WEEE
collection facilities in the disposition
of this product and otherwise
observe all applicable requirements.
The unit can also be returned to
Megger at any time at no charge for
the disposal.
CE marking indicates that the
product conforms to the applicable
EC directives for products placed
on the the market in the European
Economic Area (EEA).
Information duty regarding
substances on REACH article 33,
SVHC-list
This product contains a coin cell battery which
contains 1,2- dimethoxyethane (CAS 110-71-4) above
0.1% by weight.
Warning and caution notices
Warning and caution notices are used throughout
this manual where applicable and should be strictly
observed. These notices appear in the format shown
below and are defined as follows:
Warning
Warning, as used in this manual, is defined as
a condition or practice which could result in
personal injury or loss of life.
Caution
Caution, as used in this manual, is defined as
a condition or practice which could result in
damage to or destruction of the equipment or
apparatus under test.
Instrument safety
1.
This instrument operates from a single-phase
power source. It has two-pole terminal with
ground connector and requires a two-pole,
three-terminal, live, neutral, and ground type
connector. The voltage of the power source
must be within the following rated operating
voltage: 90- 135 V AC and 170-264 V AC,
47 / 63 Hz.
2.
Before making connection to the power
source, determine that the instrument rating
matches the voltage of the power source and
has a suitable two-pole terminal with ground
connector.
3.
The power input plug must be inserted only
into a mating receptacle with a ground contact.
Do not bypass the grounding connection. Any
interruption of the grounding connection can
create an electric shock hazard. Determine that
the receptacle is properly wired before inserting
the plug.