27
FRAX Software
© 2011 Megger Sweden AB
Exit
(Alt+F4)
Terminates the FRAX Software
4.1.1
New Test ... (Ctrl+N)
The software requires a file and a folder location to save its data. The command "New Test"
opens the "Save As" dialog.
4.1.1.1
Measurement Type
The first window appear in New Test is the Measurement type window
In "Measurement type" window, select the tab of your choice:
Quick Test
Make a single sweep test with the Sweep label of your choice
Multiple Sweeps
Make it possible to use and design "Sweep groups" containing one
or more sweeps of your choice
Use Measurement as
Template
Make it possible to use an earlier performed measurement as
template for a new measurement
In the "Quick Test" tab, simply enter the "measurement name" of your choice and hit "OK".
In the "Multiple Sweeps" tab, you select one of the pre-defined test templates containing one
or more sweeps. To modify the predefined sweep plans, use the buttons "Add" and "Delete".
The names can be changed by selecting a "Sweep group" or "Sweep name" and enter a new
name. Select a "Sweep group" and select which Sweeps that should be included by setting
the cross in front of the sweep name(s) and then hit "OK". For more information see
Appendix D
Note that the "Measurements Settings" in "Quick Test" and "Multiple Sweeps" are taken
from the FRAX measurement settings.... in the configuration menu. However, you can change
the "Measurement settings" sweep by sweep in the legend before performing the
measurements.
