Megasat Traveller-Man 3, Руководство пользователя

Страница: 29 / 68

2. Installation
07 ENGLISH
1. Prepare the adhesive for mounting.
2. Now apply the adhesive to the under-
side of the antenna base in serpentine
lines so that the adhesive cures well all
the way inside.
3. Now immediately (within 5 minutes after applying the adhesive) place the
antenna on the marked field. Press the foot lightly and evenly and fix the
antenna so that it does not slip, e.g. with adhesive tape. There must still be
at least 2 mm of adhesive between the antenna foot and the surface after
pressing on. The adhesive is cured after max. 48 hours at +18° C and a rela -
tive humidity of 50%. If there is a low humidity during the installation period,
spray some water into the air around the antenna after the adhesive has
been applied.
4. Remove any leaked adhesive mass immediately with a spatula or similar and
clean the soiled surfaces with the cleaner and a fleece cloth.
5. After the complete assembly and har-
dening of the adhesive, a silicone joint
can be drawn around the mounting
plate.
6. Then place the antenna on the moun-
ting plate and fasten it again with the
four Allen screws.
2.3 Gluing instructions