08
ENGLISH
2. Installation
2.4 Installation indoors
2.5 Installation of the dish
1. The control cable and coaxial cable is routed inside the vehicle.
IMPORTANT:
The control cable must not be shortened.
2. Make sure when you choosing a location for the control unit and the set-top box
that both devices are in a dry and a protected place.
3. Do not place the control unit and the set-top box close to heat sources and ensure
sufficient ventilation.
4. Below are the basic connections for the antenna system are shown:
1. Turn on the control unit.
2. Press the SEARCH button and wait until the back part of the antenna is erected.
3. Remove the power supply to the control unit - the search is interrupted and you can
now assembly the dish.
4. After assembly the dish you can connect the power supply back on and start a normal scan.
• Connect the power supply (red and black thick cable) for the control unit to your
car battery via a fuse (7 amps) to avoid a cable fire at short circuit. The yellow cable
is connected to the ignition plus of the vehicle (12 volts line only when the ignition
leads), and also protected with a fuse of 7 amps. The remaining black wire is connec-
ted to the corresponding negative (ground).
• Connect the cables coming from the antenna to the control unit:
- 7 m Control cable with green connector into „CONTROL CONNECTOR“
- 10 m Coaxial cable with F-connector in „ANTENNA“
• Connect the control unit to the set-top box:
- 1,5 m Kcoaxial cable with F-connector from „RECEIVER“ to set-top box.
Содержание 1500082
