SAFETY MANUAL
Electrical safety
PPM0732 pulse generator module is high voltage equipment. Please be
very careful and operate by qualified personnel only.
There is a risk of electric shock, strong electromagnetic interference,
damage of the generator, or other electronic equipment in case of improper
use.
It is strongly prohibited to switch on the generator without an output
coaxial cable. We recommend using at least 50 centimeters length coaxial
cable connected between the generator and the load (antenna or first
attenuator) to prevent permanent damage to the generator. There is a risk of
electrical arcing on the open HV coaxial connector and damage to the
output circuit of the generator.
When adding or removing the generator to or from the system, ensure that
the power supply is unplugged (in OFF state). Please apply power supply
only after connecting output and input coaxial cables.
Please provide sufficient free space and allow free airflow around the
generator for good cooling in case of long time operation at a high
repetition rate.
Operation safety
Please read this manual before installing and using the generator.
Before using the product, make sure that all the cables are applicable and
not damaged. High voltage connectors should be clean and dry, free from
dust, dirt, and any obstacles.
To avoid short circuits, keep metal parts like clips, screws, and staples
away from the generator.
The generator is designed for operation in normal laboratory conditions.
Avoid dust, humidity, and temperature extremes. Do not place the
generator in any place where it may become wet.
Place the generator on a stable surface.
If you encounter any technical problem with the generator, please contact
Megaimpulse Ltd. Do not try to repair the generator by yourself.
MEGAIMPULSE LTD. 2
