4
Control panel and functions of the digital display
Temperature control
The temperature setting you require for laminating can vary and can be affected by many different
factors, these include thickness of media, thickness and construction of laminating film, speed of the
machine and temperature and humidity of the room you are working in. Please refer to the guide at
the bottom of this page if you need help.
The temperature control dial will increase or decrease the set
temperature as it is turned and the set temperature will show on
the LCD display. The current temperature of the rollers will also
be displayed on the LCD display.
The temperature ranges from 0°C-140°C. If the temperature
reaches 140°C, the overheating protection function will
automatically activate to prevent the machine getting any hotter.
Approximate temperature guide
This chart is a rough guide only and should NOT be taken as an exact indication of the settings for
your laminating job. As previously stated, many different factors can affect the temperature and
speed required. The supplier does not accept responsibility for incorrect settings being applied.
Example film
Approx temperature Approx speed
Ordyl 940 for non ferrous
materials
105°C - 110°C
0.6 - 1.0m per min
Ordyl 240E for ferrous
materials
120°C - 130°C
0.3
– 0.6m per min (decrease speed for
thicker materials and increase
temperature slightly)
Dry film soldermask
105°C - 110°C
0.6 - 1.0m per min
Speed control
The speed control function allows adjustment of the speed of the machine. This can be manually
adjusted by turning the knob clockwise to increase the speed and anti-clockwise to decrease the
speed. The speed can range from 0M per min to 1.4M per min
Current Temperature
Set Temperature
