2
Photopolymer Dry Film Laminator
The Photopolymer dry film laminators are simple and efficient units for
laminating all types of polymer film resists to the clean surface of copper
laminates and chemically milled components. The laminator uses accurate
controlled temperature and feed to laminate the dry film resist to the metal
surface as well as removing the Polyolefin separator sheet.
Two models are available either
22-22813-1
(18”) or
22-22812-1
(24”).
Contents
1x laminator and stand with the following removable parts.
2x film take up rollers
2x film mounting bars
1x safety guard
1x feed tray
1x upper drip tray
1x lower drip tray
1x stand base tray
1x mains lead
1x film cutter
1x user instructions
1x allen key
NB. In order to avoid damage during transit we will sometimes pack the removable parts in a
separate box. If this is the case you will not have to go through the removing procedures as
described later on.
Safety Precautions
Do not use the machine if the power cord is damaged in anyway. Do not use a
a power supply that is not in accordance with the rated voltage.
Do not try to disassemble, modify or repair the machine yourself. If you
encounter a problem you must call a qualified engineer.
Keep long hair, loose clothing and items such as ties and jewellery away from
the rollers of the machine at all times to avoid danger of entanglement. If
entanglement occurs, press the REVERSE button or cut off the power
immediately.
Keep water and liquids away from the machine at all times. Do not operate the
machine with wet hands. Do not cut off the power to the machine whilst in
operation (except if entanglement occurs).
Use the safety guard at all times.
The Laminator works at a high temperature therefore ensure you do not touch
the rollers or any part of the machine which states ‘HOT’ or ‘CAUTION’ whilst it
is in operation. Do not cover the machine if it is still cooling down. Do not
laminate any material other than that which is stated in this manual and do not
use any lamination film other than that which recommended.
