MEFE—Mitchell Engineering Food Equipment Pty Ltd
23 Storie Street Clontarf QLD 4019 Australia
www.mefe.com.au | [email protected]
Page 2
+617 3283 4536
Free AU 1800 669 006
Product Description
•
This sensor tap is designed to turn on with sensor activation and off when hands are removed.
•
Features a micro
-
computer infrared sensor control module, low consumption microprocessor chip with stable perfor-
mance and high anti
-
interference.
•
Automatically calibrates sensing range according to the environment and stores this in the electronic chip.
•
A water saving aerator is used in the faucet to prevent water splash back and allow for a soft flow.
•
Supplied with integrated DC 6V battery pack.
•
The faucet has been precisely manufactured and tested, ensuring the quality of the product satisfies international
standards.
Pre
-
Install Instructions
Please choose an appropriate basin before installation, avoid basins with strong reflective surfaces.
The sensor tap should be installed 250mm minimum above the washbasin.
Please ensure all pipes have been flushed for at least 60 seconds and are clear of dirt
and impurities
(water must be clear).
Installation must be in accordance with the National Plumbing and Drainage standard –
AS/NZS 3500.
When installing/removing battery's remove the sensor first then the battery pack.
Do not
use force when unplugging wires and removing the battery pack.
Ensure the flow adjustment is set correctly for your water pressure
Specifications
*
AA Alkaline batteries must be maximum 14mm in diameter. If it seems you are forcing the batteries please choose a different brand as AA
batteries can range between 13.5 and 14.5mm in diameter. We recommend Energizer Max E91 AA batteries.
*
To reprogram sensing range use optional remote 673
-
100R.
WaterMark Certified
Australia and New Zealand WaterMark certified with approved licence number WM
-
022559.
6 Star WELS Rating
This guarantees that the product is in accordance with the standard set under the National Water Efficiency Labelling and
Standards and has the highest possible water efficiency rated 6 Stars. Licence number 1718.
DDA Compliant
Suitable for use for AS 1428.1 design and access requirements when installed in reference to AS 1428.1 2009 Amendment 1
Power
DC 6V 4 x AA alkaline batteries*
(batteries not supplied)
Installation Diameter
Single hole to suit G
1/2”
Battery Life
150,000 cycles
Response Time
0.3 seconds
Sensing Distance
Default 0 to 10cm
Reprogrammed with remote achieves 0
to 40cm*
Water Stop Protection (Auto
Shut Off)
Approx. 30
-
60 seconds
Working Temperature
1°C
-
60°C
Working Pressure
0.07Mpa—
0.7
Mpa
Inlet Size
G
1/2”
Faucet Body Material
Stainless Steel
