MEFE—Mitchell Engineering Food Equipment Pty Ltd
23 Storie Street Clontarf QLD 4019 Australia
www.mefe.com.au | [email protected]
Page 3
+617 3283 4536
Free AU 1800 669 006
Technical Data
1.
Invisible light rays are continuously emitted from the faucet sensor.
2.
When the user
’
s hands comes into range of the senor detection zone, the solenoid valve is activated.
3.
After the user removes their hands, the valve closes.
4.
The circuit will automatically reset for the next user.
5.
If an object is in view for
30
—
60
seconds, the faucet will automatically shut off. The faucet will remain off until the ob-
ject is removed.
Installation
Leave a hole of G1/2
’
in diameter, 25mm inner thread depth in the wall (Figure 1).
Rest the thread end of the faucet with thread sealing tap into the G1/2
’
thread hole. Use a spanner to fix it to avoid
leakage of water (Figure 2).
Open the cap of the faucet by twisting anti
-
clockwise with your hand (Figure 3).
Take out the battery housing and install batteries. Once the batteries are installed, return the battery holder into posi-
tion and put the sensor back into the faucet immediately. When the LED light does not flash, remove the sensor and
plug in the solenoid valve to accurately adjust the sensing distance (Figure 4).
Connect the solenoid valve and the sensor. The faucet is now ready for use (Figure 5).
