MEFE—Mitchell Engineering Food Equipment Pty Ltd
23 Storie Street Clontarf QLD 4019 Australia
www.mefe.com.au | [email protected]
Page 3
+617 3283 4536
Free AU 1800 669 006
Safety Notes Continued:
Avoid contact with moving parts. To prevent person injury and property damage, make sure that: Hands, Hair, Clothing and
Cooking Accessories do NOT come into contact with the rotating area of the appliance during use.
The mincer is intended exclusively for mincing meat, under NO circumstances for other purposes.
Only push food to be processed into the filling opening with the stuffer. Under NO circumstances use fingers or other objects
such as cutlery. Failure to observe this information can cause accidents and injuries as well as damage to the device.
To avoid clogging the filling opening do not process excessively large quantities at once. The mincer is not suitable for pro-
cessing frozen meat. Defrost frozen meat before running through mincer.
Failure to observe these instructions and the resulting damage to the equipment will void all warranty.
Instructions for Three Phase Motor:
Before first use, check the machine rotates in the direction indicated by the arrow.
Before the machine is turned on, remove the Front Nut, Mincer Plate, Cross Blade and Worm Screw from the machine.
After checking the rotational direction is correct, install the Worm Screw, Cross Blade, Mincer Plate and Front Nut to the ma-
chine, in that order.
Intended Use:
If you forget to turn off the unit before unplugging the power cord, wait at least 10 seconds before restoring power.
Never leave the unit unattended when the power plug is plugged in
. Always unplug the power cord when leaving the unit. If
you are not going to be using the unit for some time, please remove individual components and clean for storage.
To lubricate the machine, prevent rust and prevent meat sticking to the machine and accessories
, apply a thin layer of cook-
ing oil to the Cross Blade, Mincing Plates, and Worm Screw before first use and after each subsequent use. Mistreatment, or
lack of lubricant can lead to excessive abrasion and wear of the meat
-
crushing parts.
Cleaning and Care instructions:
The mincer MUST be thoroughly cleaned before first use. Pay particular attention to cleaning the parts that come into direct
contact with food. After use, the mincer must be thoroughly cleaned to prevent the formation of bacteria. We recommend
that the gears, gasket and cylinder interior are lightly moistened with cooking oil after each cleaning.
Always disconnect the mains plug before cleaning.
