MEFE—Mitchell Engineering Food Equipment Pty Ltd
23 Storie Street Clontarf QLD 4019 Australia
www.mefe.com.au | [email protected]
Page 2
+617 3283 4536
Free AU 1800 669 006
Congratulations for purchasing this Meat Mincer and Grinder from MEFE.
This machine is driven via enclosed gears. The machine is designed to be smooth running, reliable and looks professional. The
fully stainless steel unit meets the strictest hygiene standards. This machine is suitable for use in hotels, restaurants, commer-
cial kitchens and more.
Technical Specifications:
Safety Notes:
Please read these instructions carefully, and use the device for food preparation only.
Persons with physical, sensory or mental disabilities may not use the device unless supervised and instructed by someone re-
sponsible for their safety.
Keep out of reach of children.
To prevent hair, clothing or chains from getting into the moving parts, please keep hair fastened, and remove jewellery and
flowing clothes before operation. Always work in a concentrated manner.
Keep all parts of the unit and accessories clean as they come into contact with food. Thoroughly clean all parts of unit before
each use.
Do not use solvents, benzene or alcohol to clean the unit.
Please note: To prevent overheating the best operating practice is to run the unit for no more than 15 minutes uninterrupt-
ed, following a 5 minute cool down before further use. The machine should be used with a duty cycle of 75%.
You can run the machine for a maximum of 3
-
4 hours continuously, however this does run the risk of overheating the motor
and voiding your warranty. The copper wire can undertake 130°C, and the machine body can undertake 75°C.
Before use, check the local power supply is suitable for the motor. If the voltage is higher than 230V or lower than 210V, use a
transformer or a stable supply unit.
Device contains valuable recyclable materials, for this reason, please dispose of old units at suitable facilities. Check your local
governing bodies for specific advise when disposing of old units.
Machine
#12
#22
#32
Productivity (kg/hr)
150
250
320
Speed of blade (r/min)
190
180/218
165/190
Motor (W)
800
850
1500
Voltage (V)
110 / 220 / 380
Dimensions
380 x 240 X 415
410 x 240 x 450
530 x 270 x 500
Weight (kg)
27
31
53
