MEFE—Mitchell Engineering Food Equipment Pty Ltd
23 Storie Street Clontarf QLD 4019 Australia
www.mefe.com.au | [email protected]
Page 4
+617 3283 4536
Free AU 1800 669 006
1.1 Additional Specific Safety Rules Continued
6.
DO NOT USE A WHEEL THAT VIBRATES. Check blade guides and adjust / replace if worn
7.
INSPECT WHEELS for cracks or fragments before starting the machine. REPLACE DAMAGED WHEELS immediately.
8.
STAND TO ONE SIDE before turning the machine on.
9.
NEVER START THE MACHINE with the work piece against the blade. The work piece can be drawn into the blade causing
damage to the machine an/or serious injury.
10.
CLEAN THE MACHINE thoroughly when processing different types of work pieces.
11.
AVOID awkward operations and hand positions. A sudden slip could cause a hand to move into the blade
12. KEEP ARMS, HANDS and fingers away from the blade.
13. NEVER APPLY COOLANT directly to the blade.
14. NEVER PERFORM LAYOUT, assembly, or set up work on the table/work area when the machine is running. A sudden slip
could cause a hand to move into the wheel. Severe injury can result.
15. TURN THE MACHINE OFF, disconnect the machine from power source and clean the table/work area before leaving the
machine. Lock the switch in the
“
OFF
”
position to prevent unauthorized use.
2. Product
This Bandsaw model is a newly developed product with high efficiency and low consumption, streamline looks and easy opera-
tion. The saw is designed to slice frozen meat or fish and bone by a bandsaw blade operated by an electric motor. The body,
frame and cover of the saw are made out of Stainless Steel for durability, anti
-
rust properties and ease of cleaning. Fitted to
the saw there is a thickness adjustment plate, to adjust slicing thickness and prevent any trembling of the blades. The blade
also runs through guides to allow for straight cuts.
For safety purposes there is a safety clamp on the body cover. At the top of the saw is a tension adjustment knob so that the
workers can easily maintain the proper tension of the saw if necessary.
In order to minimize the heat from the motor, there is a ventilation hole on the motor cover and to protect the motor from
there is silicone seal on the front cover.
The operation switch has a safety guard to prevent any accidental or careless operation.
WARNING!
Failure to follow these rules may result in serious personal injury.
Read, understand and observe all instructions in this manual before using or operating the tool for which it is written and
supplied. Ensure that anyone who is to use the tool has read and understood the instructions provided.
