Meech 924EX, Руководство по эксплуатации

Страница: 21 / 32

19
Fault Finding
Tests must be completed by a qualified electrical engineer.
If in doubt contact the Meech head office or your local distributor.
CAUTION:
Whilst no danger to personnel exists, it is essential that any high voltage
ionising equipment makes no contact with water or water based fluids.
Should such an event occur, disconnect immediately and return equipment to
the manufacturer for water damage assessment.
The Model 924EX ionising bar forms part of a system, comprising the bar
itself and a Meech Pulsed DC Controller.
To verify where a fault may have occurred it is important to test each item of
the system individually. Should more than one bar be connected to a power
supply, each must be tested individually.
To check the Pulsed DC system follow the procedure detailed below:
Disconnect the electrical supply to the system.