Meech 915EX, Руководство по эксплуатации

Страница: 9 / 20

Mounting of the bar is by 20mm M4 studs mounted in a track at the rear of the bar.
These can be slid to any point along the bar’s length to meet the machine’s available
fixing points.
The chassis of the bar is electrically connected to ground on the power unit via the
flexible armoured conduit. However, it is good practice to provide a secondary
grounding through the fixing points where practical.
The HT cable and armoured conduit require connection to a Meech model 904 power
unit. Please consult the 904 instruction manual for further instruction.
NB: Meech model 904 power unit is not ATEX rated and hence must be mounted
outside the hazardous zone. For this reason a standard 5m HT cable is provided but
this can be extended upon request.
1. Free space is required on opposite sides of the target material, not a roller or solid
object.
7