Meech 915EX, Руководство по эксплуатации

Страница: 13 / 20

Fault Finding
Tests must be completed by a qualified electrical engineer.
If in doubt please contact Meech head office or your local distributor.
CAUTION:
Whilst no danger to personnel exists, it is essential that, with the exception of bars
with a water resistant option, high voltage ionising equipment, makes no contact with
water or water based fluids. Should such an event occur, disconnect immediately and
return equipment to the manufacturer for water damage assessment.
The Model 915EX ionising bar forms part of a system, comprising the bar itself and a
Model 904 Power Unit.
To verify where a fault may have occurred it is important to test each item of the system
individually. Should more than one bar be connected to a power unit, these must be
tested individually.
To check the Model 915EX bar follow the procedure detailed below.
1. Switch off the electrical supply to the system and disconnect the IEC plug.
11