ENGLISH
51
5. That the blade is not unbalanced.
6. If the blade is damaged or unbalanced, it must be replaced.
Blade
For safety reasons you should only ever have your blade sharpened, balanced and
mounted by an authorized service workshop. For optimum results it is recommended
that the blade should be inspected once a year.
Changing the blade (Fig. 22)
Only ever use original spare parts when having the blade replaced. Never have any
other model of blade fitted.
Checking the oil level
Important:
Never run the engine with no or too little oil. This could cause severe
damage to the engine.
Use 10W40 engine oil.
Checking the oil level:
Stand the lawn mower on a flat level surface.
Unscrew the oil dip stick (Fig. 13/Item 14) by turning anticlockwise, pull out and wipe.
Insert the dip stick back in the filling mount as far as the stop, but do not screw back
in. Pull out the dip stick again and read off the oil level while holding horizontally. The
oil level must be between the maximum
（
Fig. 14/Item H) and the minimum (Fig.
14/Item L). The movable orange plastic part on the oil dip stick provides protection
against oil foam.
Changing the oil
Change the engine oil every year before the start of the season when the engine is
warm.
●
Use engine oil (10W40)
。
●
Place a flat oil drip tray on the ground
●
tip the lawn mower onto its left side (the opposite side to the oil filling socket).
（
Fig.
19)
Important:
Before you tip the lawn mower onto its side, completely empty the fuel
tank using a petrol suction pump. The lawn mower must never be tilted by more than
90 degrees.
Содержание 721-215
