ENGLISH
47
16 2x screws for installing the lower push bar
17 2x screws for installing the upper push bar
18 2x gaskets for installing the lower push bar
19 Metal bracket for hooking on the starter cord
20 2x Pentagon nuts
21 1x clamps
22 4x wheels
23 2x Left wheel bolts
24 2x Right wheel bolts
25 4x metal washers for assembling wheel
26 4x wheel caps
ASSEMBLY
Assembling the components
Some parts of the mower come disassembled. For quick and easy assembly, read and
follow the instructions below.
Important!
You will need the following additional tools (not supplied) for assembly,
and also for maintenance work:
●
A flat oil drip tray (for changing the oil)
●
A 1 liter measuring jug (oil/petrol resistant)
●
A petrol can (5 liters is sufficient for approx. 6 operating hours)
●
Household wipes (to wipe up oil/petrol residue; dispose of these at a filling station)
●
A petrol suction pump (plastic, available from DIY stores)
●
An oil can with hand pump (available from DIY stores)
●
1 liter of engine oil
(
10W-40)
Assembling the lawn mower
1. Take the mower and attachment parts out of the packaging and check that all parts
are present (Fig. 2-3).
2. Fasten the lower push bar to the mounts on the mower housing (Fig. 4-6)
Содержание 721-215
