ENGLISH
49
In order to avoid any unintentional start-ups of the lawn mower, it comes equipped
with an engine brake (Fig. 1/Item 1) which must be pulled back before the engine can
be started. When the engine control lever is released it must return to its initial
position, at which point the engine automatically switches off.
Before you start the lawn mower, push the primer three times
（
Fig. 17/Item 6
）
Press the engine brake lever
（
Fig. 18/Pos. I) together and give the starter cord a
vigorous pull.
Before you start mowing, you should run through this operation several times in order
to ensure that the machine is working properly.
Whenever you need to perform any kind of adjustment and/or repair work on your
lawn mower, wait until the blade has come to a complete stop. Always switch off the
engine before carrying out any adjustments, maintenance or repairs.
Note:
1. Engine brake (Fig. 18/Item 1): Use the lever to stop the engine. When you release
the lever the engine and the blade stop automatically (Fig.18/Pos. O). To mow, hold
the lever in the working position (Fig. 18/Pos. I). Before you start to mow, check the
start/stop lever several times to be sure that it is working properly. Ensure that the
tension cable can be smoothly operated (i.e. is not catching or kinking in any way).
2.
Caution:
The blade begins to rotate as soon as the engine is started.
Important:
Before you start the engine, move the motor brake several times to be sure that the
stop cable is properly working.
Note:
The engine is factory set to a speed that is
optimal for cutting and blowing grass into the basket and is designed to provide many
years of use.
3. Check the oil level.
4. Fill the tank with approx. 1.0 liters of petrol whenever empty
（
Fig. 15), using a
measuring jug to do so. Ensure that the petrol is free of any contaminants.
Note:
Use only unleaded petrol as fuel.
Warning:
Never use more than one safety petrol can. Do not smoke when refueling.
Switch off the engine before refueling and allow the engine to cool down for a few
minutes.
5. Ensure that the ignition cable is connected to the spark plug (Fig. 16)
6. Push the primer three times
（
Fig. 17/Item 6)
Important:
When starting a new engine for the first time, firmly push the yellow
primer (Fig. 17/Item 6) five times.
Then for all future starts, push the primer three times.
Содержание 721-215
