EN
7
Starting the engine
NOTE:
Always fill up with fuel and engine oil
before using for the first time.
1.
Press the primer pump 3-5 times. The
arrow indicates the primer pump.
2.
Stand behind the lawnmower. Keep the engine brake loop handle pressed against the
handle.
3.
Quickly pull the starter cord repeatedly until the engine starts. Let the handle return to its
original position very slowly when the engine starts.
4.
The blade starts rotating when the engine starts. Keep the engine brake loop handle pressed
against the handle while working.
5.
The engine stops when the engine brake loop handle is released.
MAINTENANCE
WARNING:
Switch off the engine, release the spark plug lead from the spark plug, and wait until all
moving parts have completely stopped before refuelling, cleaning, maintenance and/or repairs.
• Check the oil level regularly and top up or change the oil if necessary.
• Remove grass from underneath the deck regularly.
• Lubricate the wheel axles and bearings regularly with grease.
• Regularly check that the blade is sharp and correctly balanced.
• Regularly check that all screw connections are properly tightened. Damaged or defective screw
connections can cause serious personal injury and/or material damage.
• If you run against a hard object, stop and check that the blade is not blocked or damaged.
Qualified personnel or an authorised service centre should carry out repairs.
Grass catcher
Empty and clean the grass catcher and store in a dry, well-ventilated area.
Blade maintenance
1.
The blade should be sharpened at intervals of about 25 working hours.
2.
Remove the blade by undoing the screw holding the blade. Check the blade bracket and
replace worn or damaged parts.
