EN
82
Changing engine oil
Drain off the old oil while the engine is warm� Warm oil runs easier and the tank can be fully
emptied�
1�
Place a suitable container beneath the engine to collect the old oil and then remove the oil
filler cap/dipstick and drain plug�
2�
Wait until the old oil has completely run out, refit the drain plug and make sure it is tightly in
place�
3�
The oil container and used oil must be disposed of in accordance with applicable regulations�
Take it to the recycling station�
4�
Make sure that the engine is on a flat surface and fill with the recommended grade of oil up
to the outer edge of the oil filler opening�
5�
Screw the filler cap/dipstick back in place�
Engine oil recommendations
• Oil is a major factor affecting performance and service life� Use a cleaning vehicle oil designed
for four-stroke engines�
• SAE 10W-30 is recommended for normal use� Other viscosities may be used where the mean
temperature in the environment is within the recommended ranges as shown in the diagram�
Oil drain plug
Ambient temperature
Max
Min
Содержание 721-408
Страница 8: ...SE 8 SYMBOLER Varning Ljudeffektniv R rliga delar Explosion eller eldsv da Heta ytor Giftiga avgaser...
Страница 29: ...NO 29 SYMBOLER Advarsel Lydeffektsniv Bevegelige deler Eksplosjon eller brann Varme flater Giftige gasser...
Страница 72: ...EN 72 SYMBOLS Warning Sound power level Moving parts Explosions or fire Hot surfaces Poisonous fumes...
Страница 90: ...EN 90 WIRING DIAGRAM Black Black 3 mm 3 mm Spark plug Ignition coil Engine switch...