MEE TSD-ST241W-CN, Руководство пользователя

Страница: 33 / 46

Connection &
Adjustments
9
Image Adjustment (for analog connection)
5. Display Adjustment (OSD Function)
This product has two ways to adjust the picture image Automatic screen adjustment and Manual screen adjustment.
At
fi rst, execute Automatic screen adjustment after connecting the monitor to the PC. For further adjustment, use Manual
screen adjustment.
In rare cases, any image may not be displayed with the speci fi ed frequency (Horiz: 30.0 to 80.0kHz, Vert.:
50.0 to 75.0Hz). Please change the refresh rate or resolution of the PC in such case.
1. Automatic screen adjustment
(1) Turn on the monitor and the PC.
(2) According to select Auto Image at the OSD menu, it starts automatic screen adjustment of Display Width, Phase, H-
Position and V-Position by detecting input signal. The character of Auto Adjust is displayed while adjusting the screen
automatically.
(3) It is adjustment completion.
Afterwards, it is asked that the result after it adjusts it is preserved.
Please select “Yes” and preserve the result when there is no problem in the display after it adjusts it.
Please execute the adjustment again by selecting “No”, and changing the input signal if the adjustment is necessary
again.
The automatic screen adjustment might not function well for a character represention alone like DOS prompt.
This function may fail to operate depending on the used PC type and/or video cards. In such case, use
Manual screen adjustment.
2. Manual screen adjustment
(1) Turn on the monitor and the PC.
(2) Refer to following OSD function (
→ P.11), and select the desired adjustment items.
(3) Press the adjustment buttons to adjust the image on the screen as you like.