- 9 -
User ID Setting
Select
Return
User ID
001
CHAPTER 4 ID, Date and Time Setting
Fig.4-1
Fig.4-2
Fig.4-3
Fig.4-4
Always set date and time before using the unit for the first time. Set different ID
numbers for different users.
Check date and time are correct before using the unit, and reset them if necessary. Date and
time are important indicators when a measurement is taken.
4.1 Date & Time Settings
Set the correct time according to the following steps:
4.2 User ID Setting
Date and Time
Date: 20 09
09
17
12
49
17
02
-
-
-
-
Time:
Select
Return
Alarm Setting
Data Manage
Date and Time
System Setting
MENU
Select
Return
User ID Setting
Date and Time
Date: 20 09
17
12
49
17
02
-
-
-
-
Time:
Select
Return
1) Press the power switch for 3 seconds to power on the pulse oximeter and then press the
menu button to enter the main menu, refer to the Fig.4-1.
2) Press the Down button to select “Date and Time” item, and then press the Menu button to
enter the time setup screen, refer to Fig.4-2.
Pick different sub-items to set and press the Select button to highlight it and then using the
Up or Down button to adjust the value. At last, press the Select button to con
fi
rm.
Set other sub-items of data and time according to the “Year setting” illustrated in the above
Fig.4-2 & 4-3.
Enter the “User ID Setting” from the main menu screen, refer
to Fig.4-4. Press the “Select” button to make the User ID
number highlighted, and then press the Up or Down button
to increase or decrease the ID number, and then press
the Select button to con
fi
rm your settings. The range of ID
number is: 001-127.
Note: User ID cannot be changed and you may get the
prompt information saying that “Cannot change!!!”, if you
attempt to change it when taking a measurement.
INSTRUCTION MANUAL
