Medora SolarBee SB10000PW, Руководство пользователя

Страница: 27 / 36

26
SolarBee Troubleshooting
If you find that the SolarBee has quit
operating, the following checks can be
performed:
Connection Check -
1) Locate the external electronic controller and
be sure that each PV module cord is properly
connected.
2) Inside the external electronic controller,
check that the battery is properly connected.
3) Follow each cord from the external
electronic controller to its originating
component and be sure it is not damaged.
Visual Electronic Controller Check - The
SolarBee contains an LED (Light Emitting
Diode) blink sequence that indicates the
machine operation status. The blinking LEDs
are found on the Brain-board located inside
the large external controller. A solid green
LED is also located on the Zahn board. To
observe the LEDs, 1) open the door of the
external electronic controller and locate the
laminated LED label on the inside of the door.
2) Using the LED label, locate the Brain-board
and the Zahn board. Observe and record
the blinking LEDs (color and # of blinks in
succession) and solid green LED (off or on).
3) Using the LED label, match your blink
observations to the corresponding indication.
Use the information on the next two pages to
proceed.
DC Voltage Check -
If a DC voltmeter is available, the battery
voltage can be measured off of the brainboard
at the 3-pin connection (white, black, and
orange leads). 1) Using the voltmeter positive
lead on the white screw terminal and voltmeter
negative lead on the black screw terminal,
the voltage can be measured. 2) Record the
measurement.
12 VDC+ 12 VDC-
SCADA Information - SolarBee operation
status information can be transmitted from
the machine to a nearby monitoring station by
using one of SolarBee's various SCADA kits.
Contact SolarBee Customer Service for more
information.
SolarBee is committed to serving our
customers. Feel free to contact a SolarBee
Customer Service Representative if
you experience any problems with your
SolarBee. At SolarBee, we will get you
technical support, parts, or a service visit to
make sure that your SolarBee is back online
in short time. Ph: +1 866 437 8076
CustomerService@SolarBee.com