8
WARNINGS & SAFETY INSTRUCTIONS
Ì
General CAUTIONS
Keep the bed a minimum of 12 inches away from any direct heat source.
When the bed is not going to be used for an extended period, UNPLUG electric bed from
the wall outlet.
DO NOT unplug the power cord from the junction box.
The bed is not designed to be used as a patient transport. When transporting a patient,
use an approved patient transport, otherwise injury or damage may result.
When operating or moving the bed, always ensure that the individual in the bed is
properly positioned within the bed. DO NOT allow extremities to extend beyond the sides
or between the bed rails when performing these functions.
After assembly, test to make sure that all sections are properly and securely in place and
operate correctly BEFORE use.
Ensure that the head and foot spring sections are securely locked to each other and to
the head and foot-boards BEFORE use.
Ensure that the pendant and power cords are routed and secured properly so the cords
do not become entangled, pinched and/or severed during operation of the electric bed.
NEVER operate the bed if these cords are damaged.
Keep all moving parts and all drive shafts free of obstructions during operation of the
bed. (i.e. blankets/sheets, heating blankets/pads, tubing, wiring, etc. and other types of
products using electric cords which may get tangled around the bed, legs or optional
side rails).
Ensure the bed caster locks are properly engaged to prevent casters from moving
whenever the bed is stationary.
ALWAYS lock the caster locks when transferring into or
out of the bed. Inspect the caster locks BEFORE using the bed to ensure the locks
function adequately. Even with casters properly locked, some floor surfaces will allow
the bed to move under some conditions. Use of the bed on such floor surfaces must be
evaluated by the care provider.
If any part of the bed is not working properly, call a qualified technician to examine and
repair it.
!