28
Troubleshooting
Problem
Inspection Procedure
Possible Solution
Pump not functioning
1. PCB terminals are not
secured or incorrectly connected
2. PC board malfunctions
3. Fuse(s) burn out
1. Check terminals
2. Replace PC board
3. Replace fuse(s)
Pump functioning but
no air output
1. Bello diaphragm in
compressor breaks down
2. Check for loose air tubes
connection inside Control Unit.
3. Coil inside compressor
burn down
1. Replace diaphragm
2. Secure tubing inside
the pump
3. Replace coil
Alarm light doesn’t go away
after the sleeve is fully inflated
1. Alarm light breaks down
2. Function indicator
break down
1. Replace low pressure light
2. Replace PC board
Warranty
Medline Industries, Inc. guarantees that this equipment is free from defects in
materials and workmanship. Our obligation under this warranty is limited to the
repair of equipment returned to the place of purchase within 12 months of delivery
date. We agree to service / adjust any equipment returned, and to replace or repair
any part that is proven to be a warranty defect, at no charge.
This warranty excludes equipment damage through shipping, tampering, improper
maintenance, carelessness, accident, negligence or misuse, or products that have
been altered, repaired or dismantled other than with the manufacturer’s written
authorization and by its approved procedures and by properly qualified technicians.
In no event shall Medline products be liable for any direct, indirect or consequential
damages or losses resulting from the use of this equipment.
Medline United States
1-800-MEDLINE (633-5463)
www.medline.com | [email protected]
Hemo-Force is a trademark of Medline Industries, Inc. Velcro is a registered trademark of Velcro.
Medline Industries, Inc.
One Medline Place
Mundelein, IL 60060
Содержание Hemo-Force MDS600INT
Страница 1: ...1...
