Medline Alterra MAXX, Руководство по эксплуатации и обслуживанию, Страница: 12 / 28

12 FCEALTMAXX (PIC-xxxxx) | Revision: 01/09/17
CAUTION : Prior to raising or lowering the bed and/or assist rails, ensure that the cord for the
hand pendant has not become entangled in bed parts. The cord should be kept clear or moving
parts at all times.
The bed has a rolling base that allows it to be rolled or locked at any height. The Alterra MAXX
bed is equipped with TWO brakes locks; one on the head end of the bed and one on the foot
end. To operate the brake locks, press down on the red pedal from either side of the bed. To
unlock, press the green foot pedal from either side of the bed. ALWAYS use the brake locks
EXCEPT when moving the bed. Pads can be adjusted by rotating them clockwise or counter-
clockwise to ensure proper contact with floor. Secure the individual locking casters.
CAUTION
If all four casters are not locked, swivel and wheel rotation will allow bed motion with little
or no resistance. This can result in loss of balance, fall and personal injury. Ensure that all
four casters are locked to avoid any bed movement during resident transfer and/or use. The
central locking mechanism can be used for most situations where locking casters are needed.
However, movement near the head section of the bed may still result if force is applied. The
bed will be most secure if the head end casters are locked along with the central lock and/or
foot end casters.
ELECTRONICS
CONTROL BOx
The picture below shows the various control box connections with actuators, hand pendant
and battery backup.