Medisafe PCF Pro, Руководство пользователя

Страница: 49 / 74

PCF Pro User Manual
DOC01851 Page 49 of 74
LED Edge
The
LED Edge
colour status indicator on the
lid visually shows the current state of the
machine:
Blue
Panning Resetting
Static Idle
Pulsing
Cycle Running
Green
Flashing
Cycle End
Static
Cycle Completed
Red
Flashing Cycle Halted
Static Error
Panning
Carrier Lift Moving
Amber
Panning
Test Mode
Routine Maintenance
Important safety information:
Always ensure mains power is disconnected.
Always adhere to the recommended safety
precautions for cleaning products in use.
It is recommended that Personal Protection
Equipment (PPE) be worn during
loading/unloading, and cleaning or
decontaminating the equipment. This must
include apron, gloves and eye-protection.
For cleaning internal and external surfaces, a
disinfectant cleaner such as Isopropyl Alcohol
or a household kitchen cleaner can be used,
provided it is marked as a DISINFECTANT
cleaner.
In the interests of health and safety, all
medical washers should be cleaned on a
weekly basis as part of a routine maintenance
program. This will ensure the machine is safe
for operators and maintenance personnel. To
keep your machine operating within its design
parameters the following checks must be
performed on a regular basis. Please note that
completion of these checks is not a substitute
for regular servicing and maintenance by a
suitably qualified engineer.
All maintenance procedures should be carried
out in a well-lit environment, recommended
minimum lighting level is 500Lux.
Before Every Cycle
1. Visually check that there is enough
chemical for the next wash.
Replenish as necessary.
2. Clean the wash tank filter:
Ensure the tank filter is correctly
replaced such that it is inserted flat
into the recess.
3. Check the wash chamber is free from
any debris or deposits.
4. Check the spray arms rotate.
5. Remove each basket and check the
spray arms for blockage:
Remove the spray arm by first
rotating counter clockwise and then
pull.