S
S
E
E
T
T
U
U
P
P
9
Deuts
ch
English
Ned
erla
n
ds
Français
Españo
l
Slovenš
č
in
a
2.
R
IBBON INSTALLATION
Switch on the printer. Wait 10 seconds for the printhead to lift,
then:
1.
Open the external flap located on
the right-hand side of the printer.
2.
Remove the protective foam.
3.
Take the new ribbon out of its pack-
aging and make sure that the film is
stretched after removing the card
(A).
4.
Pay attention to the position of the
inked ribbon in accordance with the
illustration on the right.
5.
Lift the green catch lever and push
the inked ribbon into the compart-
ment until it engages audibly.
6.
Close the external flap.
Â
Warning
! Never touch the film cartridge with your
fingers. Make sure the cartridge is completely in-
serted into the printer.
