Tightly hold the hard drive and the mobile rack, turn it over
and use four M3 x 4mm countersunk screws (not supplied) to
screw the hard drive in place using the corresponding screw
holes.
NOTICE!
The hard drive decoupler does not need to be replaced
because the hard drive has been suffi ciently secured in
place by the screws.
Carefully slide the mobile rack into the slot until it clicks into place.
Lock the mobile rack in place by pressing on the handle until it audibly clicks into
place. The hard drive will be recognised and can now be used.
Optical drive
Loading a disc
NOTICE!
Risk of damage!
The high speeds in the drive can cause defective media to break
and damage your device. Damage caused by faulty media is not
covered under warranty and repairs will be chargeable.
− Do not use scratched, broken, dirty or poor quality discs.
− Do not stick protective fi lm or other stickers onto the discs
because the adhesive could damage the surface of the disc
and destroy your data.
− Inspect discs carefully before inserting them. If damage or dirt
is visible, do not use these discs.
− Press the eject button
4
on the optical drive
3
to open the drawer.
− Insert the disc into the drawer with the label facing upwards so that it is lying fl at.
− Carefully push the drawer until you feel some resistance and the drawer
automatically moves back into the optical drive.
Optical drive
30
8866 EN ALDI AUS Content MSN 2006 3048 RC1.indb 30
8866 EN ALDI AUS Content MSN 2006 3048 RC1.indb 30
11.08.2016 11:34:49
11.08.2016 11:34:49
