Connecting an HDMI device
HDMI stands for “High Defi nition Multimedia Interface”, which is an interface for fully
digital transfer of audio and video data.
− You can connect a television set, monitor or projector to this socket
24
if these
output devices have the corresponding connection.
Connecting USB devices
Only connect your USB devices after initial set-up of your
new PC. This will prevent unnecessary confusion during
installation. These devices can normally be connected
during operation. Please refer to the operating manual for
your peripheral device.
• The PC’s USB power outputs are protected by a fuse (limited power source
as per EN60950). This ensures that, if there is a technical defect in the PC, the
peripheral devices connected to the affected sockets will not be damaged.
Normally, a choice of several connection sockets
9
/
11
is available.
Ensure that the plug and the socket fi t together precisely
in order to avoid any damage to the contacts. Due to the
arrangement of the contacts, the plug will only fi t into the
socket in one position.
− Connect devices (printer, scanner, camera, etc.) to the corresponding socket.
Where possible, always connect your devices to the port
that they were originally installed on. Otherwise you will
be assigned a new ID and the drivers will need to be
reinstalled.
Connecting the audio output / headphones / speaker
boxes
Connect active speaker boxes for playback or an audio connection cable for recording.
Read the operating instructions for your stereo to fi nd out which input you need to
use (usually Line In or Aux).
− Connect the cable to the green socket
15
on the back of your PC with the 3.5mm
stereo jack.
Connecting
21
8866 EN ALDI AUS Content MSN 2006 3048 RC1.indb 21
8866 EN ALDI AUS Content MSN 2006 3048 RC1.indb 21
11.08.2016 11:34:47
11.08.2016 11:34:47
